Why is My Geek Vape Leaking? 6 Common Reasons and Fixes
Geek Vapes are known for their excellent flavor production, smooth airflow, and long battery life.
However, a leaking Geek vape is surely one of the most annoying. It can be incredibly frustrating, not to mention wasteful.
Although Geek Vape manufacturers focus on making their tanks fully sealed and leak-proof, occasional leakages are still quite common.
If you’re finding your Geek vape is leaking, don’t buy a new vape tank straight away. There are a few things you can do to try and fix the issue first.
In this guide, I will take a deep look into why these devices leak, and how you can do to fix Geek vape leaking.
Why is My Geek Vape Leaking? 6 Common Reasons and Fixes
The most common causes can be traced to a broken seal, Overfilling, a Faulty or old Coil, Using the Wrong E-liquid, Stored on Its Side, or Improper Vaping Technique.
But don’t worry, once you’ve pinpointed the issue, solving it will only take a few minutes.
1. Broken Seals
The reasons why Geek vape tanks are usually so good at holding e-liquid is because their reservoirs are tightly sealed by metal threading and rubber or silicone gaskets.
Those design elements create a seal that allows the tank to maintain an internal vacuum.
Over time seals, especially the silicone or rubber O-rings, will perish or may break due to wear or over-tightening, causing your tank to leak.
Cracks or damage to the tank itself can create pathways for e-liquid to escape.
Vape leaking can also arise if your device parts aren’t screwed in tightly and securely enough.
Solution:
Stripping and cleaning you tank completely also check all seals are properly seated.
If you have a damaged seal somewhere, all you need to do is replace the seals. This is easy because Geek vapes usually come with additional seals included.
Inspect your tank carefully for any signs of damage. If you do discover a crack, Replace it!
When assembling, Screw it in so it fits snugly – but Make sure you do not overtight the components as you might damage the O-ring that prevents leakage once you close the cap.
2. Overfilling
Every Geek vape tank has a max fill level which, if exceeded, e-liquid can get into the airflow system and leak out.
Especially when the device is stored in a hot environment, the e-liquid inside can expand due to heat, leading to leaks.
However, most vapers overestimate how much e-liquid their gear can handle.
In fact, leaving a slight gap of air creates a vacuum which helps to keep the liquid in place.
Solution:
Make sure you did not overfill your tank and always avoid filling the tank beyond its recommended capacity , leave some space for air to prevent pressure-related leaks.
Make sure that all the airflow holes are fully closed when refilling your tank with e-liquid.
Also, make sure not to fill it too quickly, or you can risk flooding the tank.
3. Faulty or old Coil
Old or faulty coils can also be the cause of leaks in your vape. Over time the cotton in your coil burns out while the metal wire will wear out.
This happens when the coil struggles to turn all the e-liquid into vapour, leading to excess vape juice passing through the device and leaking out of the vape tank.
Apart from the leakage, another telltale sign of a worn-out coil is a burnt taste or discoloration of your vaping juice.
Solution:
To fix this problem, all you need to do is replace your coils with new ones. Make sure that they are secured correctly in the vape tank to avoid further risk of leaks.
You should also wait long enough for the cotton to absorb the e-liquid fully before vaping to ensure a smooth experience. Fill your tank with e-liquid and let it stand for about five minutes before taking a hit.
4. Bad liquid pg/vg ratio
Most Geek Vape tanks come with replaceable coils with varying resistances. The different resistance coils not only perform differently but they are also suited to different types of vape juice.
Not all vape juices are created equal. An e-liquid’s thickness varies depending on the amount of vegetable glycerin (VG) and propylene glycol (PG) it contains.
A higher VG rating such as a 70VG/30PG means that the liquid is thicker. PG-based e-liquids are usually thinner in consistency than VG-based e-liquids.
If the VG-based e-juice is thick, it won’t vaporize correctly, which may clog up the coil a lot more quickly.
If your PG-based e-liquid is too thin, it’ll flow through the coil’s wick openings too quickly and will ultimately leak out from the bottom of the tank or pod.
Solution:
If you're experiencing these issues, Use liquids compatible with your coil. Always look at your e-juice label to determine its PG/VG ratio.
Sub-ohm coils are suited to an e-liquid that has a higher concentration of VG, as these are thicker. Higher resistance coils are suited to an e-liquid that has a higher concentration of PG, as it is thinner.
For example, if you have a cloud chucker or a high-powered device, go for vape juices with higher VG content to see if it helps reduce the problem.
5. Vape Stored on Its Side
Geek vape tanks only do a good job of resisting leaks if they’re kept upright.
If you store your tank on its side, the E-liquid can start seeping out through the airflow holes.
Solution:
When you are not using your Geek vape, or even in between vapes, the unit should be left in a vertical position.
6. Improper Vaping Technique
The way you inhale can also cause leaks into your mouth. Unlike smoking a cigarette, Taking too hard of a draw can pull excess vape juice into the mouthpiece, leading to leakage.
This is because you haven’t given the coil adequate time to heat up and turn your e-liquid into vapor. The design and operational power of the coil determine that.
Solution:
Adjust your vaping style and make sure you are taking long, steady and slow inhales on your vape.
Immediate Steps to Take When You Notice a Leak
If you discover that your Geek Vpae is leaking, Here’s how to do it.
Step 1: Stop using the device immediately and Let the device cool down.
Step 2: Remove the pod or tank from the device
Step 3: Use a paper towel to wipe away any excess liquid from the device and your surroundings.
Step 4: After cleaning up any spills, examine your Geek Vape closely for signs of physical damage.
Look for cracks in the casing or around the mouthpiece where e-liquid might escape.
If you notice any damage, it’s best to discontinue use and consider replacing the device.
If there are no visible signs of damage but leakage persists, inspect the seals around the mouthpiece and airflow holes.
If the seal is dirty, clean it. if it is damaged, replace it.
Next, Check if the coil is fitted correctly or needs replacing.
Step 5: After cheaking, Refill the e-juice. Make sure that you don’t overfill.
Conclusion
Experiencing leakage with your Geek Vape can be frustrating and leads to a bad vaping experience.
Luckily, this guide provides you with the possible causes of vape leaks. It could be a Broken Seals, overfilled tank, damaged coil, Using the Wrong E-liquid, improper storage, or wrong vaping technique.
In either case, once you identify the culprit behind the leakage, it’s not difficult to find an effective solution. You can solve the problem and maintain a clean and safe vaping experience.
The more you get to know your vape and understand how it works, the easier it becomes to troubleshoot if it ever starts to leak.
I hope the fixes I have covered in this guide have helped you troubleshoot your leak and avoid future leakages.