Multi-Functional Silicone Nectar Collector

Taking your dab session on the go has always been a cumbersome affair, but not anymore! The multi-functional silicone nectar collector is an all-in-one kit that keeps your concentrates neat, orderly, organized, and accessible anywhere. It packs up into a flat, rectangular shape that hardly looks like a smoking accessory, let alone a complete dab rig. This kit comes with all the silicone pieces, featuring four compartments to store whatever you desire within them, and three more compartments housing the silicone pipe, glass tip, and titanium tip.

The multi-functional silicone nectar collector allows you to carry everything you need for smoking. One end of the nectar collector travel case contains two large compartments. These compartments are pre-filled: One contains a nectar collector, which is a long, straight silicone tube designed for effortless vaporization of cannabis waxes or oils. The other compartment opens into two smaller pockets that are preloaded with a nail—one glass and one titanium.

At the opposite end, a silicone tab can be peeled off to reveal a larger compartment designed for quick and easy access. The base of this pocket is lined with a glass container, which doubles as a convenient cleaning surface. Since the sticky substances you put in there don't stick as easily, and the compartment can be quickly cleaned once you're done. Combined with the nectar collector, this is a far more travel-friendly option than traditional dab rigs. You won't have to worry about losing or breaking your favorite piece when you're out and about. Heat the nail with a torch (not included), and then dab directly from the glass dish. Because this piece is made of extremely heat-resistant silicone, you can safely pop the hot nail back into its storage compartment when you're finished. No need to risk burning your fingers or waiting for it to cool down!

Finally, one of the long sides of the kit contains an additional compartment that has been divided into four individual storage chambers. These chambers are useful for storing various samples of cannabis concentrate. However, we suggest that you keep them wrapped in wax paper to avoid getting them dirty.

How To Clean A Nectar Collector Kit?

Step 1: Open the whole set

Separate the parts of the nectar extractor (e.g. the tip and the body), making sure that the body part is fully open and ready for cleaning.

Step 2: Soak with Isopropyl Alcohol

Mix isopropyl alcohol and salt and place in a bag or container. Place the main part of the honey sucker into the solution, making sure that the solution completely covers and penetrates every corner of the device. It is recommended to soak for 30 to 60 minutes, or until the residue begins to loosen and can be easily rinsed.

Note: If the tip is made of titanium, do not soak it with the main body. Instead, clean with heat and gently wipe with a cotton swab once the residue has loosened. For ceramic or quartz tips, clean with the main body.

Step 3: Cleaning with cotton swabs

After soaking, rinse briefly with warm water, then gently wipe with a cotton swab to remove residue that is difficult to rinse. Multiple operations may be required for complete removal.

Step 4: Soak in warm water (optional)

If isopropyl alcohol and salt are not commonly used, there is an option to soak the unit in warm water and soap, again making sure the solution adequately covers the unit.

Step 5: Thoroughly rinse the interior

Rinse the interior of the unit with hot water, either using the spray nozzle feature of the faucet, to ensure that every nook and cranny is rinsed. This helps to identify areas that need further cleaning.

Step 6: Use pass-through strips to clean hard-to-reach areas

If cotton swabs are not enough, use pass-through strips. Fold or twist the strip as necessary and carefully place it inside the unit, pushing it back and forth to clean hard-to-reach areas. Avoid scratching the unit with the metal part of the strip.

Step 7: Drying

After completing the above steps, rinse the unit again to ensure there is no residue. Then leave it to dry, making sure the unit is upright to avoid standing water. Once completely dry, the unit is ready to be used again.

Specifications

• Weight: 360g
• Size: 152x80x26 mm / 5.98x3.15x1.02 inches
• Material: Silicone + Stainless Steel
• Color: Mixed color printing shipped randomly

Product Includes

• 1x silicone pipe
• 1x glass nail
• 1x titanium nail
• 1 compartment with glass bowl
• 5 in 1 travel dab kit
• 4 storage compartments

Experience the ultimate in flexibility with our Multi-Functional Silicone Nectar Collector. Designed for multiple uses, it ensures a seamless nectar collection process.