Polka Dot Glass Pipe

The white color with dot glass pipe is a charming and elegant smoking accessory.

This pipe features a pristine white base color with decorative dots, creating a visually appealing and unique design. The combination of white and dots gives it a clean and sophisticated look.

Crafted from glass, it offers a smooth smoking experience. The quality material ensures durability, so you can enjoy this pipe for a long time.

The white color with a dot design makes this pipe stand out from the crowd. It can be a great addition to your collection or a stylish gift for a fellow smoker.

Whether you're using it for a relaxing smoking session or simply admiring its beauty, the white color with dot glass pipe is sure to please.

How To Use A Glass Pipe?

Step 1: Grind your cannabis flower

Remove all seeds and stems from your bud before grinding it. Use your grinder to break up your cannabis into smaller, uniform pieces. The trick is to grind the flower evenly for the best possible smoking experience. Grinding weed too finely will result in a power that’s difficult to smoke.

Step 2: Pack the bowl

Take a small amount of ground cannabis and place it into the bowl of the pipe. Don’t pack it too tightly or it may be difficult to light. On the other hand, if you pack it too loosely, it may result in an uneven burn and wasted bud. It’s best to go slow until you know.

Step 3: Light the bowl

Hold a flame over the bowl (but not too close to your face!) and inhale slowly as you light the cannabis. Make sure to inhale slowly and deeply, so the smoke enters your lungs. Avoid inhaling too quickly or taking too much at once, or you may have a coughing fit. Less is more when it comes to inhaling cannabis.

Step 4: Cover the carb

If your pipe has a carb (a small hole on the side), cover it with your finger while inhaling. Release your finger when you stop inhaling to clear the chamber of smoke. Coordinating these fine motor movements may not come naturally initially, but you’ll have it down pat with practice.

Step 5: Inhale and exhale

Slowly inhale the smoke from the pipe into your lungs and hold it for a few seconds before exhaling. If you are new to smoking weed from a pipe or in general, go slow until you know.

Step 6: Repeat

Repeat steps 3-5 until you’ve smoked as much as you’d like. It’s not quite simple, and you need to ensure you’re not taking hits that are too big or the THC will hit hard. Remember, you can always smoke a little more, but you can never smoke less.

Step 7: Clean the pipe

When you’re finished smoking, use a pipe cleaner or cotton swab to remove any remaining debris from the bowl. Depending on how frequently you smoke weed out of a pipe, clean it regularly by soaking it in rubbing alcohol (if it’s made of glass or certain types of metal).

How To Clean A Glass Pipe?

Step 1: Dissemble Your Glass Pipe

Most glass pipes are simple, one-piece deals. Others are complicated conglomerations of glass bits. If your glass pipe falls into the former category, don’t try to disassemble it — you’ll likely break the pipe and cut yourself in the process. We give you permission to move on to step two. But if your glass pipe falls in the latter category, dismantle that sucker in preparation for the next step.

Step 2: Rinse With Hot Water

Using hot running water is a highly effective way to kickstart the cleaning process of your glass pipe. The force of the running water serves to dislodge some of the surface resin that accumulates over time, while the warmth of the water begins to dissolve the adhesive bonds holding the residue in place. To maximize the effectiveness of this method, aim to use the hottest water you can comfortably handle, and you may even consider donning dish-washing gloves (the less fashionable yellow ones). These gloves not only protect your hands but also enable you to increase the water temperature, providing an extra boost to the cleaning process. It’s worth noting that while we once experimented with 18″ cowhide welding gloves to achieve boiling-lava-hot water, we found that dish-washing gloves are the superior choice for this task.

Step 3: Place Your Glass Pipe in a Plastic Container

Following the hot water rinse, it’s time to stow your glass pipe safely for the next cleaning step. Place it inside a small Ziploc bag or a sealable plastic container. It’s important to opt for a soft plastic container because the next cleaning stage requires energetic movement, and glass-to-glass or metal-to-glass contact can potentially lead to cracks, chips, or even shattering of your pipe.

Step 4: Submerge Your Glass Pipe

Now, proceed by adding a minimum of ¼ cup of rubbing alcohol and at least one tablespoon of salt into the container. If you’re dealing with a larger glass pipe, it’s advisable to increase the quantities to ½ cup of rubbing alcohol and two tablespoons of salt.

It’s not crucial to be exact with the measurements; the key is to ensure both ingredients are present in sufficient quantities relative to the size of your glass pipe. Rubbing alcohol, with its mild acidity, serves to break down the sticky resin that accumulates within the pipe. Salt, on the other hand, acts as an abrasive agent, working in harmony with the acid to enhance the cleaning power of the solution.

Step 5: Shake it Up

After you seal the baggie or plastic container, shake it vigorously. This moves the alcohol and the salt through all the tiny curves and crevices and breaks up the marijuana resin that has gathered there. When you think you’ve shaken enough, shake more. You may have to do this for at least five minutes to really dislodge the sticky mess. If you’ve added enough alcohol to completely cover each piece, you can let them soak for 10 to 15 minutes, and then come back and shake some more. This is especially useful if you’ve built up layer upon layer of resin from prolonged use.

Step 6: More Hot Water

Take your glass pipe out of the baggie or container, and dispose of the used alcohol. Then, thoroughly rinse everything with hot water. This rinsing process is crucial for eliminating any leftover resin, salt, and alcohol residue. In case you encounter persistent residue in tight or narrow sections, such as the stem, consider using a pipe cleaner or a bottle brush to delicately remove the remaining buildup. Once you’ve successfully removed all traces of residue, give everything another final rinse with hot water. Allow all components to air dry completely before using your glass pipe again, ensuring a clean and fresh smoking experience.

Step 7: Repeat the Process

If it has been weeks, or perhaps even months (we hope not!), since your last glass pipe cleaning, you might need to go through the entire cleaning process once more, possibly even multiple times. Over time, with the aid of alcohol, salt, and consistent agitation, the layers of residue will gradually dissolve, unveiling the pristine glass beneath the accumulated buildup.

Specification

• Product Size:37 g
• Color： Cream 
• Material:Borosilicate Glass
• Net Weight:37 g

Products include

• 1x White Color With Dot Glass Pipe