Dab Pens & Wax Pens for Concentrates
Yes, wax pens do smell, but the smell will not be as strong as smoking marijuana flower through a bong, joint or hand pipe.
This is because the concentrate is heated inside the wax pen using a battery-powered heating element, as opposed to lighting a joint or an open bowl of flower with a lighter.
While most wax pens cost less than $100, the typical range for a wax pen ranges from $30 to $150.
If you want a good dab pen but on a tight budget, Lookah has got you covered with affordable options that won't break the bank.
The Lookah Seahorse Pro Plus is a top-quality dab pen available for only $53.99, while the basic Seahorse 2.0 is even more budget-friendly at just $42.99.
The Pro Plus model comes with a glass airway and added extras like a water pipe connection capability, enhancing the value for the slight price increase.
Regular cleaning is essential to keeping your Lookah Seahorse Pro in top shape.
Follow this easy step-by-step guide to ensure your device is always ready for use.
Step 1: Gather the cleaning materials
Gather the following cleaning supplies: a small glass bowl, cotton swabs, warm water, rubbing alcohol, and paper towels.
Step 2: Disassembly
Carefully take apart your Lookah Seahorse Pro. Gently remove the mouthpiece, coil, and any other detachable parts.
Be sure to handle each component with care to avoid any damage.
Step 3: Soaking and Cleaning
Next, soak the non-plastic disassembled parts in a cleaning solution or a mixture of isopropyl alcohol and warm water. Let them sit for about 30 minutes to loosen up any built-up residue.
While the parts are soaking, you can use cotton swabs to scrub the interior and exterior of the device. Make sure to get into all the nooks and crannies to ensure a thorough clean.
Step 4: Rinsing
After soaking and scrubbing, rinse all the parts with warm water to wash away any remaining residue from the cleaning solution.
Make sure that all the cleaning solution is completely rinsed off to avoid any leftover taste or potential damage to the device.
Step 5: Drying
Finally, let all the parts air dry completely before reassembling your Lookah Seahorse Pro.
Place the parts on a clean towel and allow them to dry thoroughly. This step is essential to prevent any moisture from causing damage when you put the device back together.
Lookah Seahorse works by touching a hot tip to the concentrate, which then vaporizes for inhalation.
These devices are designed for ease of use and a customizable vaping experience.
Here's a simple guide to using them, based on the Seahorse Pro model:
Step 1: Charge the device
Before you begin, make sure your seahorse dab pen is completely charged.
A flashing red light means it's time to charge. Full charge turns the LED cyan.
Step 2: Turn On the Device
Press the power button five times quickly to turn on the seahorse dab pen.
Step 3: Adjust Temperature Settings
Our seahorse wax pens feature 3 variable voltage settings, letting you adjust the heat for bigger clouds or a purer taste.
Double-press the power button to cycle through settings (blue for low, purple for mid, white for high, and preheat).
Step 4: Choose Manual or Session Mode
Seahorse dab pen allows you to choose between Manual and Session Modes, depending on your preference.
Manual Mode: Hold the power button to heat the tip for 3 to 5 seconds to let it get hot before you start dabbing.
Once hot, touch it to your concentrate at a 45-degree angle, and inhale as it vaporizes. Release the button halfway through your inhalation to continue vaporizing.
45-degree angle prevents the tip from being submerged in the concentrate and picking up too much wax which causes the airway to get clogged.
Session Mode: Press the power button three times to start heating and wait for the light to stop flashing.
Once the light is solid, begin vaping by touching the hot coil to your concentrate and inhaling.
Step 5: Inhale and Enjoy
Place your mouth on the mouthpiece and inhale the vapor.
After you start to get some vapor through the mouthpiece, move the tip of the vape pen away from the concentrate and keep heating it intermittently to fully vaporize the dab before applying more concentrate to the tip.
The tip of the vape pen will remain hot for a while after it finishes heating; do not touch the tip while it is hot or bring it into contact with any flammable materials.
Remember to repeat steps as needed for your session.
Dab pens and wax pens are the same thing and can be used interchangeably. There are no differences between the two.
Dabs are highly potent cannabis concentrates or marijuana derivatives. They are made from the resin of the cannabis plant.
The extraction method is often done at an industrial scale using a solvent such as Butane gas, Carbon dioxide, or Ethyl alcohol. Also, there are solventless extraction methods.
The resulting product is usually some dark brown wax containing concentrated plant resins, flavonoids, and cannabinoids.
The resulting substances are usually names due to their appearance, such as wax, budder, crumble, shatter, terp sauce, diamonds, etc.
Dabbing is inhaling the vapors from a concentrated form of marijuana made by an extraction method that uses solvent.
Wax pens are used with cannabis concentrates like wax or shatter and are specifically designed to withstand high temperatures for potent hits.
On the other hand, vapes are more versatile, suitable for e-liquids, cannabis oils, or dry herbs, and generally operate at lower temperatures.
Unlike dab pens that need manual loading of concentrates, vape pens are more straightforward and user-friendly, as they just need you to attach the cartridge to the battery.
Generally, Normal Vape pens cannot vaporize a waxy concentrate.